revised 12/19/2013 www.phihong.com 125w constant current led driver pda125 series for outdoor lighting features ? high efficiency ? ip66, potted ? ul8750 compliant ? 90v-304vac input voltage range ? 5 year warranty ? brownout/brownout recovery ? ovp, short and open circuit protection ? wide operating temperature range applications ? general lighting ? outdoor lighting ? street lighting ? architectural lighting safety approvals ? ce ? cul/ul mechanical characteristics ? length: 217.2mm (8.55in) ? height: 38mm (1.49in) ? width: 68mm (2.67in) ? weight: 936g (2.06lbs) output specifications note (1): x is b for non-dimming or w for 0-10v dimming note (2): output power drops to 112.5w maximum when input is 90-100vac phihong is not responsible for any error, and reserves the right to make changes without notice. please visit our website at ww w.phihong.com for the most up-to-date specifications and contact information. model (1) dc output voltage output current output power (2) min. typ. max. pda125x-700f 134v - 178.6v 700ma 125w pda125x-1a0f 84v - 119v 1050ma 125w pda125x-1a4f 67v - 89.3v 1400ma 125w pda125x-2a0f 47v - 61.5v 2000ma 125w pda125x-2a8f 34v - 44.6v 2800ma 125w pda125x-3a1f 30v - 40.3v 3100ma 125w
pda125x characteristics www.phihong.com input: ac input voltage range 90vac to 304vac ac input frequency 47~63hz maximum input current 2a leakage current 0.5ma maximum at 230vac input inrush current 30a output: power factor 0.9 ripple and noise <35% (p-p) efficiency 93% at 230~ 277vac 91% at 120vac turn-on delay time <1s maximum at nominal ac power on environmental: temperature operation -40 to +60c non-operation -40 to +85c case temperature <75c operating humidity 10 to 95% dimming function: (w models) dimming control 0-10vdc dimming output to load pwm at 1000hz dimming grounding dim(-) and vout(-) must never be connected together to ensure proper operation and isolation requirements emc en55015/cispr 15/fcc 47 part 15/18 class a immunity iec61000-4-2 iec61000-4-3 iec61000-4-4 iec61000-4-5 iec61000-4-6 iec61000-4-8 iec61000-4-11 iec61000-3-2 class c input over current protection the input power line will be fused with a 2a fuse short-circuit protection the psu will withstand a short circuit across the outputs without damage open circuit protection once the circuit is opened, the output voltage should be less than 120% at nominal ac input conditions dielectric withsta nd (hi-pot) test primary to secondary: 4242vdc for 1 minute, 5.5ma insulation resistance primary to secondary: >5m ohm 500vdc, 1 minute lifespan 50k hours at full output power, 50c ambient, tcase < rating wire connections position terminal color specification line black awg18 solid wire neutral white awg18 solid wire ground green/yellow awg18 solid wire vout+ red awg18 solid wire vout- blue awg18 solid wire dim+ violet awg18 solid wire dim- grey awg18 solid wire warranty 5 years
dimension diagram unit:mm www.phihong.com
|
